TMS zl Management and Configuration Guide ST.1.2.100916

5-44
Network Address Translation
NAT Examples
3. Create a NAT policy to exclude traffic that should be sent over the VPN
from translation.
a. Select Firewall > NAT Policies > Policies.
b. Click Add Policy.
c. Select None for the translation type.
d. For From Zone, select INTERNAL.
e. For To Zone, select EXTERNAL.
f. For Service, select Any Service.
g. For Source, select VLAN20.
h. For Destination, select RemoteClients.
i. For Insert Position (Optional), type 1.
Figure 5-27. Add NAT Policy Window—Exclusion Policy
j. Click OK.
4. Click Save.