TMS zl Management and Configuration Guide ST.1.2.100916

6-24
Intrusion Detection and Prevention
Configure IDS/IPS
TMS-Subscription Hardware ID. If you have booted the TMS zl Module to
the Product OS, you can obtain the TMS-subscription hardware ID from:
■ Product OS context of the CLI
■ Web browser interface
To obtain the TMS-subscription hardware ID from the Product OS context of
the CLI, you must first access the host switch’s CLI. Then, from the manager-
level context of the host switch’s CLI, complete the following steps:
1. Enter the Product OS context by typing one of the following commands:
Option 1. You can access the Product OS context by entering the following
command from either the switch’s manager-level or global configuration
context.:
For example, if you want to enter the Product OS for a TMS zl Module, which
is installed in slot C, enter:
hostswitch# services c name tms-module
Option 2. Rather than specify name and tms-module in the services command,
you can specify the index number that the host switch has assigned to the TMS
zl Module, using the following command:
Syntax: services <slot ID> name <product name>
Moves you to the product OS context on the module.
Replace <slot ID> with the letter for the chassis slot in which
the module is installed.
Replace <product name> with tms-module. The TMS zl Module’s
Product OS context is always assigned the product name tms-
module.
Syntax: services <slot ID> <product index>
Moves you to an OS context on the module.
Replace <slot ID> with the letter for the chassis slot in which
the module is installed.
Replace <product index> with the index number that your
particular switch has assigned the TMS zl Module.