TMS zl Management and Configuration Guide ST.1.2.100916

7-31
Virtual Private Networks
Configure an IPsec Client-to-Site VPN
a. For Ty pe , select the ID type:
–IP Address
– Domain Name
–Email Address
– Distinguished Name
b. For Value, type the correct value.
If you select IP Address for Type, the address that you specify in the
Value box must match the IP address that you specified for the local
gateway.
Table 7-4 shows the format for each ID type.
Table 7-4. Local ID Values
8. For Remote ID, specify an ID that matches the ID that remote clients send
to authenticate themselves:
a. For Ty pe , select the ID type:
–IP Address
– Domain Name
–Email Address
– Distinguished Name
b. For Value, type the correct value.
If you want multiple clients to be able to connect using this IKE policy,
you must use wildcards. Table 7-5 displays valid values and wildcards.
Table 7-5. Remote ID Values and Wildcards
Local ID Type Remote ID Value Examples
IP Address A.B.C.D 172.16.40.103
Domain Name <domainname> TMS.company.com
Email Address <name>@<domainname> [e-mail]
Distinguished Name /CN=<commonname> /CN=TMS.company.com
Remote ID Type Remote ID Value Wildcard Example Example Wildcard
IP Address A.B.C.D 0.0.0.0 172.16.40.103 0.0.0.0
Domain Name <name.domainname> <domainname> user1.company.com company.com
Email Address <name>@<domainname>*@<domainname> [e-mail] *@company.com
Distinguished
Name
/CN=<commonname>•/CN=*
•/*
/CN=TMS.company.com • /CN=*.company.com
•*