TMS zl Management and Configuration Guide ST.1.2.100916

7-32
Virtual Private Networks
Configure an IPsec Client-to-Site VPN
Note When you are using wildcards to allow multiple clients to connect using this
IKE policy, you must configure a unique ID on each client to allow clients to
log in simultaneously. Both clients cannot have the same ID because if one
client is logged in and a second client attempts to log in with the same ID, the
first client is logged out.
Each client’s unique ID must match the wildcard in the module’s remote ID.
For example, if the remote ID type and value on the module are Domain Name
and company.com, then one client can have user1.company.com as its ID and
another client can have user2.company.com.
9. Click Next.
Figure 7-12. Add IKE Policy Window—Step 2 of 3
10. Under IKE Authentication, configure the authentication method for the IKE
proposal:
a. For Key Exchange Mode, select Main Mode or Aggressive Mode.
The mode must match that configured on remote endpoints. See “IKE
modes” on page 7-17 for guidelines.