TMS zl Management and Configuration Guide ST.1.2.100916

7-43
Virtual Private Networks
Configure an IPsec Client-to-Site VPN
21. Click Apply.
The CA root certificate is displayed in the VPN > Certificates > Certificate
Authorities window.
Figure 7-24. VPN > Certificates > Certificate Authorities Window
Note If you receive an error message, the TMS zl Module cannot validate the
CA certificate. A common problem is that the module has the incorrect
time. The module takes its clock from the host switch. Verify that this
switch has the correct time.
22. Next, you must import the module’s certificate. Click the IPsec
Certificates tab.
Figure 7-25. VPN > Certificates > IPsec Certificates Window
23. Click Import Certificate under Certificates.