TMS zl Management and Configuration Guide ST.1.2.100916

7-49
Virtual Private Networks
Configure an IPsec Client-to-Site VPN
Figure 7-37. VPN > Certificates > IPsec Certificates Window
17. Click Retrieve Certificate through SCEP under Certificates.
Figure 7-38. Retrieve IPsec Certificate through SCEP Window
18. For Subject Name, typically you type the TMS zl Module’s FQDN after /CN=.
The remote tunnel endpoint will use this subject name to authenticate the
module. Therefore, the subject name must match a remote ID that is
configured on the remote endpoint. You should also specify this name for
the local ID value in the IKE policy (the type is Distinguished Name).