TMS zl Management and Configuration Guide ST.1.2.100916

7-98
Virtual Private Networks
Configure an IPsec Site-to-Site VPN with IKE
Figure 7-78. Import CRL Window
28. For Select CRL, type the path and filename for the CRL. Alternatively, click
Browse and navigate to the CRL file.
29. Click OK.
The CRL is displayed in the VPN > Certificates > CRL window.
Figure 7-79. VPN > Certificates > CRL Window (CRL Added)
30. Click Save.
Move to the next task: “Create an IPsec Proposal” on page 7-104.
Install Certificates Using SCEP
Before you begin to configure the settings for using SCEP to install certifi-
cates, make sure the time and the time zone on the TMS zl Module match those
set on the SCEP server. If the module does not have the same time and time
zone as the SCEP server, the SCEP process may fail. The TMS zl Module takes
its time from the host switch, so if you need to adjust the time, you will need
to configure the switch.
Follow these steps to install certificates automatically using SCEP:
1. In the left navigation bar of the Web browser interface, click VPN >
Certificates.
2. Click the SCEP tab.