TMS zl Management and Configuration Guide ST.1.2.100916

7-133
Virtual Private Networks
Configure an IPsec Site-to-Site VPN with Manual Keying
Figure 7-111. Add IPsec Policy Window—Step 2 of 4 (Top Section)
Refer to Figure 7-112 for help in configuring the next settings.
Figure 7-112. Example IPsec Site-to-Site VPN
12. For Local Gateway, specify an IP address on the TMS zl Module that will
act as the local VPN gateway (indicated by 1 in the figure). You have two
options:
• Select IP Address and type an IP address on the module in the box.
The IP address must be an IP address already configured on the
TMS zl Module. Type the address that the remote gateway can reach.
For example, if the remote gateway connects to the module through
the Internet, select the IP address associated with the module’s Inter-
net VLAN.