TMS zl Management and Configuration Guide ST.1.2.100916

7-135
Virtual Private Networks
Configure an IPsec Site-to-Site VPN with Manual Keying
c. For Outbound Encryption Key (ESP only), type a character string of the
specified length. The string must match the inbound encryption key
on the remote gateway.
d. For Inbound Authentication Key, type a character string of the specified
length. The string must match the outbound authentication key on the
remote gateway.
e. For Outbound Authentication Key, type a character string of the speci-
fied length. The string must match the inbound encryption key on the
remote gateway.
15. Click Next.
Figure 7-114. Add IPsec Policy Window—Step 3 of 4
16. The Step 3 of 4 window allows you to configure settings for IKE Mode
Config, which is not valid for a site-to-site VPN. Click Next.