TMS zl Management and Configuration Guide ST.1.2.100916

7-166
Virtual Private Networks
Configure an L2TP over IPsec VPN
3. Click Add user group.
Figure 7-138. Add user group Window
4. For Group Name, type a string to identify the L2TP user group.
5. Click OK.
If you want, add other groups for your L2TP users. This will allow you to assign
different rights to different remote users when you create firewall access
policies.
Add L2TP Users. When the TMS zl Module authenticates L2TP users locally,
you must configure one account for each remote user.
Note You can authenticate only 100 L2TP users to the local database. If you need
to authenticate more than 100 L2TP users, you must authenticate these users
to an external RADIUS server. See “Configure L2TP Authentication to an
External RADIUS Server” on page 7-170 for instructions.
Follow these steps:
1. In the left navigation bar of the Web browser interface, click Network >
Authentication.
2. Click the L2TP Users tab.