TMS zl Management and Configuration Guide ST.1.2.100916

7-231
Virtual Private Networks
Configure a GRE over IPsec VPN with IKE
Figure 7-189. Add IKE Policy Window—Step 3 of 3
i. For Authentication Type, select Generic or CHAP.
At some point, you must configure the username and password for
the remote gateway in one of these locations:
– An external RADIUS server—Remember, to add the RADIUS
server in the Network > Authentication > RADIUS window.
– On the module itself—In the Network > Authentication > Firewall/
XAUTH Users window, add the remote gateway account to any user
group that you want.
For more information on setting up authentication, see “User Authen-
tication” in Chapter 4: “Firewall.”
• Select TMS acts as XAUTH Client:
i. For Authentication Type, select Generic or CHAP.
ii. For Username, type a username accepted by the remote gateway’s
authentication server.
iii. For Password, type the password associated with that username.
15. Click Finish.
The IKE policy is displayed in the VPN > IPsec > IKEv1 Policies window.