TMS zl Management and Configuration Guide ST.1.2.100916

7-313
Virtual Private Networks
GRE Examples
e. For Source, specify the module’s IP address on the tunnel interface:
10.8.8.1.
f. For Destination, specify the remote module’s tunnel IP address:
10.8.8.2.
Figure 7-268. TMS zl Module—Add Policy Window
g. Click Apply.
6. Permit OSPF messages from the remote gateway.
a. For Action, accept the default, Permit Traffic.
b. For From, select ZONE4.
c. For To, select SELF.
d. For Service, specify (89) OSPFIGP.
e. For Source, specify the remote module’s tunnel IP address: 10.8.8.2.
f. For Destination, specify the module’s IP address on the tunnel inter-
face: 10.8.8.1.