TMS zl Management and Configuration Guide ST.1.2.100916

7-350
Virtual Private Networks
GRE Examples
5. Permit traffic from the local endpoints to the remote endpoints.
a. For Action, accept the default, Permit Traffic.
b. For From, select Zone2.
c. For To, select Zone5.
d. For Service, accept the default, Any.
e. For Source, specify the network VLAN65.
f. For Destination, specify the network VLAN10.
g. Click Apply.
6. Permit traffic from the remote endpoints to the local endpoints.
a. For Action, accept the default, Permit Traffic.
b. For From, select Zone5.
c. For To, select Zone2.
d. For Service, accept the default, Any.
e. For Source, specify the network VLAN10.
f. For Destination, specify the network VLAN65.
g. Click Apply.
7. Click Save.
Configure Routes for Site B
1. Click Network > Routing > Static Routes.
2. Create routes to the remote GRE tunnel endpoints:
a. Click Add static route.
b. For Destination Type, select Network.
c. For Destination Address, type 172.23.20.0/24.
d. For Gateway Address, type 192.168.55.1.
e. For Metric, leave 0.
f. For Distance, type 1.
g. Click OK.
a. Click Add static route.
b. For Destination Type, select Network.
c. For Destination Address, type 172.23.21.0/24.
d. For Gateway Address, type 192.168.56.1.
e. For Metric, leave 0.
f. For Distance, type 1.
g. Click OK.