TMS zl Management and Configuration Guide ST.1.2.100916

7-357
Virtual Private Networks
Manage VPN Connections and GRE Tunnels
d. Remote Port is present if you selected TCP or UDP for Protocol. Type the
port number for the service that you want to select. Leave the box
empty to select all ports.
e. If you selected ICMP for the protocol, for ICMP Type, select Any, Echo,
or Timestamp.
10. Click Finish.
Manage VPN Connections and GRE
Tunnels
The TMS zl Module Web browser interface displays a variety of information
about your VPN connections so that you can better manage them. Refer to the
following sections:
■ “Manage IPsec and IKE Connections” on page 7-357 to view and clear IKE
and IPsec SAs
■ “View IP Address Pools” on page 7-362 to view the IP addresses assigned
to clients by IKE mode config
■ “View L2TP Connections” on page 7-363 to view the IP addresses assigned
to L2TP clients by external RADIUS servers
■ “View GRE Tunnels” on page 7-364 to view GRE tunnels
Manage IPsec and IKE Connections
To view active VPN connections, follow these steps:
1. In the left navigation bar of the Web browser interface, click VPN > IPsec.
2. Click VPN Connections.