TMS zl Management and Configuration Guide ST.1.2.100916

7-363
Virtual Private Networks
Manage VPN Connections and GRE Tunnels
■ IKE Policy—the IKE policy associated with the pool (through the IPsec
policy)
The Active IP Address Pool Sessions section displays the IP addresses currently
assigned to remote endpoints:
■ Assigned IP Address—the IP address assigned to the remote endpoint
through IKE Mode Config
■ Peer Address—the remote endpoint’s actual IP address (as it appears on
the network through which it connects to the TMS zl Module)
■ Remote ID Type—the type of ID with which the remote endpoint identifies
itself during IKE
■ Remote ID Data—the remote endpoint’s ID
■ IP Address Pool Name—the name of the IPsec policy that the TMS zl
Module used to connect to the remote endpoint (this policy includes the
address pool from which the endpoint received its IKE Mode Config
address)
View L2TP Connections
You can see the IP addresses that are currently assigned to L2TP users who
authenticated to an external RADIUS server. In the left hand navigation bar,
click VPN > Connections. Click the L2TP Connections tab.
Figure 7-308. VPN > Connections > L2TP Connections Window
The window lists L2TP users who have authenticated to an external RADIUS
server. For each user, the following settings are displayed:
■ User—The user’s username
■ Domain—The domain of the RADIUS server to which the user authenti-
cated