TMS zl Management and Configuration Guide ST.1.2.100916

7-395
Virtual Private Networks
Configure IPSecuritas (Macintosh VPN Client)
25. To connect, select the profile that you just created. Then select the
connection that you just configured.
26. Click Start.
TMS zl Module Settings with the IPSecuritas Client
For this configuration to work, you must configure IPsec settings on the
module as described in “Configure an IPsec Client-to-Site VPN” on page 7-27.
Valid settings are displayed in Table 7-35. The table also displays necessary
firewall policies. Finally, note that VLANs and necessary routes should be in
place on the TMS zl Module. In this configuration, the TMS zl Module reaches
remote clients on a VLAN in the External zone (which is a typical configura-
tion).
Note The IPSecuritas VPN client does not support the TMS zl Module implementa-
tion of IKE mode config.