TMS zl Management and Configuration Guide ST.1.2.100916

7-446
Virtual Private Networks
Configure a Windows XP SP2 Client for L2TP over IPsec
99. For Password, type the password specified for this user either in the
module L2TP user account or on the external RADIUS server.
100.Click Connect.
After a minute or so, you should see a message that informs you that the
connection was successful.
TMS zl Module Settings with a Windows XP Client (Manual
Configuration)
Table 7-39 displays the settings that should be established on the TMS zl
Module to support the L2TP over IPsec connection. The table also displays
necessary firewall policies. Also note that VLANs and necessary routes should
already be in place on the TMS zl Module. In this configuration, the TMS zl
Module reaches remote clients on a VLAN in the External zone (which is a
typical configuration). If your clients reach the module on a different zone,
modify the settings accordingly.
Finally, when you authenticate L2TP users to an external RADIUS server,
remember to check your RADIUS server’s set up (see “Set Up a RADIUS Server
to Work with the TMS zl Module” on page 7-176).