TMS zl Management and Configuration Guide ST.1.2.100916

7-450
Virtual Private Networks
Configure a Windows XP SP2 Client for L2TP over IPsec
L2TP User account (one user for each client if used)
User Matches the username submitted by the
remote client
Add L2TP User—Step
1 of 2
User name configured in step
85 on page 7-443
Password Match the string submitted by the remote
client
Password configured in step 99
on page 7-446
User Group The group on the TMS zl Module that has
been configured with access policies for the
remote user
Authentication
Protocol
•Any
• CHAP
•PAP
• MS-CHAP
Protocols selected in step 95
on page 7-445
Server IP
Address
Any IP address in a private subnet not in use
in your network
Add L2TP User—Step
2 of 2
User IP Address Any IP address that is:
• In the same subnet as the server IP
address
• Not assigned to another dial-in user
•Primary DNS
Server
• Secondary
DNS Server
•Primary WINS
server
• Secondary
WINS server
IP addresses of your network’s servers (to
which TMS firewall access policies permit
the remote client access)
Parameter Valid Settings Configuration
Window
Matching Setting on the
Windows XP Client (Manual
Method)