TMS zl Module Installation and Getting Started Guide 2010-03

2-15
Getting Started
Initial Configuration
12. On the default gateway (the router or routing switch), create a route or
routes to the TMS VLANs. The routes’ next hop should be the TMS zl
module’s IP address on the VLAN just added.
Accessing the Web Browser Interface
To access the TMS zl module’s Web browser interface through a secure HTTPS
session, type https:// followed by the module’s IP address assigned in step 6
of the procedure above:
https://<
ip address >
Login using the defaults: User Name (manager) and Password (procurve).
Note To protect your network, HP ProCurve strongly recommends that you imme-
diately change your password.
Continue to the Dashboard, which gives an overall view of the status of the
TMS zl module.
For more information, refer to the Threat Management Services zl Module
Management and Configuration Guide.
zlSM.book Page 15 Monday, March 1, 2010 11:42 PM