TMS zl Module Installation and Getting Started Guide 2010-03

2-16
Getting Started
Initial Configuration
Obtain the TMS-Subscription Hardware ID From
Product OS Context
To obtain the TMS-subscription hardware ID from the Product OS context of
the CLI, first access the host switch’s CLI. Then, from the manager-level
context of the host switch’s CLI, complete the following steps:
1. Enter the Product OS context by typing the following command:
services c 2
2. Display the TMS-subscription hardware ID by typing the following
command:
show ips
This displays the IPS information, including the TMS-subscription hardware
ID.
3. Record the TMS-subscription hardware ID. It is needed to register the IDS/
IPS signature subscription. See “Enter the Subscription Registration ID
and the TMS-Subscription Hardware ID on the My ProCurve Portal” on
page 2-10.
Obtain the TMS-Subscription Hardware ID From Web
Browser Interface
To obtain the TMS-subscription hardware ID from the Web browser interface,
complete the following steps:
1. Access the TMS zl module’s Web browser interface, and click Intrusion
Prevention/Detection > Signatures > Download.
2. Record the TMS-subscription hardware ID. It is needed to register the IDS/
IPS signature subscription. See “Enter the Subscription Registration ID
and the TMS-Subscription Hardware ID on the My ProCurve Portal” on
page 2-10.
zlSM.book Page 16 Monday, March 1, 2010 11:42 PM