TMS zl Module Installation and Getting Started Guide 2010-03

C-4
Hardware Components
Switch LEDs
The serial number of the module also can be obtained through the CLI or
through the Web browser interface.
Switch LEDs
The following figures show the Test, Fault, and Module Status LEDs on the
switches the TMS zl module can be installed in.
Figure C-3. Test, Fault, and Module Status LEDs on a Series 5400zl switch
Figure C-4. Test, Fault, and Module Status LEDs on a Series 8200zl switch
Replacing or Removing a TMS zl Module
It is highly recommended that the module be shutdown before replacing or
removing it. The module maybe shutdown using the shutdown button on the
front panel of the module or using the following CLI command:
hostswitch# services <slot-id> shutdown
Module Status LEDs
Test LED
Fault LED
Module Status LEDs
Fault LED
Test LED
zlSM.book Page 4 Monday, March 1, 2010 11:42 PM