TMS zl Module Installation and Getting Started Guide 2010-03

1-1
Hardware Installation
TMS zl Module Overview
1
Hardware Installation
TMS zl Module Overview
The TMS zl module is an HP ProCurve zl Services Module that runs the Threat
Management Services application software. It is a multi-function security
system with integrated deep packet inspection Firewall, Intrusion Prevention/
Detection System (IPS/IDS), and VPN Gateway. It is designed for high perfor-
mance, deployment flexibility, high availability, and it scales to network
environments of all sizes and complexity. It is managed through an easy to use
Web browser interface and a Command Line Interface (CLI).
The module can be installed in any HP ProCurve zl switch (either the switch
series 5400zl or 8200zl). A maximum of four TMS zl modules can be installed
in the same chassis. Under certain conditions, a maximum of three TMS zl
modules are supported in the 5406zl chassis. See “Environmental Specifica-
tions” on page 1-5.
The TMS zl module requires switch software version K.13.55 or greater to be
installed in the switch.
The following figure shows the front panel of the TMS zl module.
Figure 1-1. Front panel of the TMS zl module
Module
Shutdown button
Module
Locator LED
HDD and CF
Status LEDs
HDD and Network
activity LEDs
USB port
Module
Status LED
zlSM.book Page 1 Monday, March 1, 2010 11:42 PM