TMS zl Module Release Notes ST.1.0.090603

Known Issues

Release ST.1.0.090213

■ PR_0000014762 — In the Web browser interface, when the primary and secondary DNS

servers’ values are cleared, no error is reported, but the secondary DNS server's value is not

cleared.

■ PR_0000014783 — When moving a TMS zl Module from one switch to another, DHCP Relay

may not start if there is a mismatch in VLAN configuration between the switches. Specifically,

if a VLAN is enabled in DHCP Relay and then the TMS zl Module is moved to another switch

which doesn't have that VLAN, the DHCP Relay agent doesn't start up and DHCP Relay will

not work. When moving a TMS zl Module, if you wish to maintain the TMS zl Module

operation, be sure the VLAN information matches before moving the module to another

switch.

■ PR_0000014785 — When executing the TMS zl Module CLI command sh port-trigger

<port-trigger_name> where the port-trigger-name does not exist, an error message is

displayed

Error: Operation failed rather than an error message stating that the port

does not exist.

■ PR_0000014794 — There is not a one-to-one correspondence between packets processed

or dropped and the log entries that are generated - more log messages than necessary are

created. The log is correct, it just has more entries than necessary to describe what happened.

■ PR_0000014823 — When adding a VLAN to a zone, the log displays two entries with the

exact same message, but containing a different priority. The message describes the routing

interface coming up. For example, if VLAN 50 is added to a zone, the following two log

messages are created:

time="2008-12-12 13:14:24" severity=warning pri=4 fw=ProCurve-TMS-zl-Module

id=routing msg="if_rtup: UP route for interface vlan50

10.10.10.1/255.255.255"

time="2008-12-12 13:14:23" severity=warning pri=5 fw=ProCurve-TMS-zl-Module

id=routing msg="if_rtup: UP route for interface vlan50

10.10.10.1/255.255.255"

■ PR_0000015081 — When using the Web browser interface for the software update feature,

the Latest Status field is not automatically refreshed. Refreshing the browser displays the

Latest Status correctly but also clears the download form. Although no longer needed by the

TMS zl Module to perform the software update, the clearing of the download form removes

some information from view.

■ PR_0000015153 — When using the TMS zl Module CLI, two commands provide an insert-at

<position> extended option: access-policy and nat. There is no error checking on the position

number provided - it is assumed that a policy or rule exists at that location. For example,

when using insert-at 1 there must be at least one policy or rule available. There must be a

valid policy or rule at the position number for whatever number is specified. If one does not

exist, an error is reported, but the zone information is not included in the error message.