TMS zl Module Release Notes ST.1.0.090603

Software Management

Software Updates

4. When the prompt says that the installation is finished, reboot the module to complete the update.

hostswitch(tms-module-C)# reboot

Using a TFTP Server.

1. Transfer the compressed image onto a TFTP server.

2. Initiate a console session with the host switch.

3. Enter the ProductOS context for the TMS zl Module.

hostswitch# services c 2

4. Copy the image from the server and install.

5. Reboot the module to complete the update.

hostswitch(tms-module-C)# reboot

For example, suppose that you copied the image to a TFTP server that has the parameters shown

below:

• •IP address—192.168.1.13

• •Filename—ST.1.0.090603.zip (copied to the root directory)

1. You would type the following:

hostswitch(tms-module-C)# copy tftp image 192.168.1.13 ST.1.0.090603.zip

2. The image is uploaded to the module, then automatically installed.

3. When the prompt says that the installation is finished, reboot the module to complete the update.

hostswitch(tms-module-C)# reboot

Using a USB Drive.

1. Extract the compressed software image.

2. Transfer the extracted image folder onto a USB drive in a directory called /services/images.

Note: The first partition on the USB drive should be in FAT32 format. You can reset the USB

format, if necessary, using the HP USB Creator tool.

3. Initiate a console session with the host switch.

4. Boot to the Services OS.

hostswitch# services c 1

hostswitch(services-module-C:PR)# boot service

5. When the module comes back online, enter the Services OS again.

hostswitch# services c 1

6. Insert the USB drive in the USB port on the TMS zl Module.