TMS zl Module Release Notes ST.1.1.100430

Software Management

Special Considerations Prior to Updating

You can type the first few letters of the directory name, then press the Tab key to complete the

name. You might need to add the last few characters of the directory name if the USB drive

contains more than one image.

9. Update the software.

For example, if the new image directory is ST.1.1.100430, you would type:

hostswitch(services-module-C:HD)# update product ST.1.1.100430

Again, you can use tab completion for the file name.

10. When the prompt says that the installation is finished, unmount and remove the USB drive.

hostswitch(services-module-C:HD)# usb unmount

Remove the USB drive from the module.

Caution: The module cannot boot (the next step) if the USB drive remains inserted in the

module.

11. Boot the module to the ProductOS to complete the update.

hostswitch(services-module-C:HD)# boot product

Special Considerations Prior to Updating

May 2010 Version, ST.1.1.100430

IMPORTANT: May-June 2010 Planned Release is version ST.1.1.100430 and is now available.

The ST.1.1.100430 release increases stability and reliability while maintaining full performance,

fulfilling the requirements that were specified in the ST.1.1.100330 release notes for the “May-June

2010 Planned Release”.

Environments that should update:

■ All TMS Environments

The latest TMS zl Module software is publicly available on the ProCurve Web site and can be obtained

here: http://www.hp.com/rnd/software/network_security.htm

. We recommended reading these Release

Notes prior to updating. We also recommend backing up your current configuration before any

update.

March 2010 Version, ST.1.1.100330

Environments that should update:

■ TMS zl Modules that are running below 75% CPU utilization

regardless of configuration

■ TMS zl Modules that are encountering stability or reliability issues