TMS zl Module Release Notes ST.1.1.100430

Known Issues

Release ST.1.1.100226/ST.1.1.100330

Although the user is warned, if the HA VLAN and HA IP Address are not configured prior to

reboot, the TMS will fail to initialize VLANs properly and no new VLANs can be added. To return

to proper operation, configure the HA VLAN and HA IP Address appropriate for your network.

For example:

ProCurve 5406zl(tms-module-C:config)# high-availability vlan 10

Success: HA VLAN set to: 10

ProCurve5406zl(tms-module-C:config)# high-availability ip 172.16.100.100

255.255.255.0

Success: HA IP Address set to: 172.16.100.100 255.255.255.0

ProCurve 5406zl(tms-module-C:config)#exit

ProCurve 5406zl(tms-module-C)#write memory

ProCurve 5406zl(tms-module-C)#boot

Device will be rebooted, do you want to continue [y/n]? y

At this point, the TMS product will initialize the VLANs correctly and new VLANs can be added.

VPN

■ PR_40382 — Importing a CRL file which does not contain the 'nextUpdate' field is not

successful.

■ PR_41431 — Field Validation failure for IKEv1 identities, distinguished-name field. While

configuring an IKEv1 policy, the CLI will take any value for the distinguished-name field when

setting identities. The manual states that this value should include the proper attribute id and

value: attributeid=value.

■ PR_41535 — Field validation failure when setting position on an IPSec policy. The CLI will

take any given positive value when setting the position of an IPSec policy. The allowed values

are between 1-65535

■ PR_42272 — In the Web browser interface, an obscure error message is displayed if the

Peer IP address is set with a value 224.x.x.x or greater. Steps to recreate:

A GRE Tunnel has already been created.

1. Open the TMS zl Module Web browser interface.

2. Go to the VPN section.

3. Select the GRE link.

4. Go to the GRE Tunnels tab

5. Click the edit button from the previously created GRE tunnel.

6. Edit the Peer IP address field with a value 224.x.x.x or greater.

7. Click the OK button.