TMS zl Module Release Notes ST.1.2.100916
Table Of Contents
- Release Notes: Version ST.1.2.100916 Software for the HP ProCurve Threat Management Services zl Module
- Contents
- Software Management
- Download Documentation from the Web
- Software Updates
- Special Considerations Prior to Updating
- Clarifications
- Enhancements
- Enhancements in ST.1.2.100916
- ST.1.1.100430
- ST.1.1.100226
- Command Line Interface (CLI) control of VPN functionality
- RADIUS authentication for management logins
- RADIUS authentication for L2TP users
- Renaming zones
- 256 VLANs now supported, increased from 19 VLANs
- Enhanced sort and filter capabilities for displaying log files
- Improved SNMP Monitoring for network traffic and key system resources
- Software Fixes in Releases ST.1.0.090213 - ST.1.2.100916
- Known Issues

40
Software Fixes in Releases ST.1.0.090213 - ST.1.2.100916
Release ST.1.2.100916
WARNING: You are attempting to save the running configuration on an HA
Participant device. This action can disrupt the configuration of the
HA cluster and can prevent proper synchronization of the cluster
configuration. This action is not recommended. Do you want to continue
[y/n]?
PR_60553 — An incorrect message was being displayed to the administrator when the administrator
used the Web browser interface to remove the master from the cluster. A message now indicates to
the user the recommended way of dismantling a cluster in order to control whether the IP and VLAN
configuration should remain intact.
VPN
■ PR_44479 — TMS zl Module will use the old CRL past the next CRL update time if it has not
retrieved the new CRL.
■ PR_54925 — Shrew Soft VPN client cannot establish the tunnel when XAUTH is enabled.
■ PR_58407 — TMS would crash after changing Remote address for IPsec Policies several
times.
■ PR_60788 / PR_61854 — CRL Auto-update functionality was not updating based upon the
CRL update settings.
■ PR_61175 — VPN disconnects every 30 minutes because changes to the inactivity timer
were fixed at 30 minutes regardless if the inactivity timer value was changed.
■ PR_45866 — Unable to edit Remote Gateway and Remote ID IP-Address values for existing
IKEv1 Policies in the Command Line Interface due to a circular dependency. The Web
browser interface did not have this limitation.