TMS zl Module Release Notes ST.1.2.100916
Table Of Contents
- Release Notes: Version ST.1.2.100916 Software for the HP ProCurve Threat Management Services zl Module
- Contents
- Software Management
- Download Documentation from the Web
- Software Updates
- Special Considerations Prior to Updating
- Clarifications
- Enhancements
- Enhancements in ST.1.2.100916
- ST.1.1.100430
- ST.1.1.100226
- Command Line Interface (CLI) control of VPN functionality
- RADIUS authentication for management logins
- RADIUS authentication for L2TP users
- Renaming zones
- 256 VLANs now supported, increased from 19 VLANs
- Enhanced sort and filter capabilities for displaying log files
- Improved SNMP Monitoring for network traffic and key system resources
- Software Fixes in Releases ST.1.0.090213 - ST.1.2.100916
- Known Issues
41
Known Issues
Release ST.1.2.100916
Known Issues
Known issues fixed in a later software release are indicated using the following format:
■ PR_xxxxxxxxxx —
To confirm what release fixed the issue, use the issue number to search the PDF file.
Known issues that are open as of the latest software release appear as follows:
■ PR_xxxxxxxxxx —
Release ST.1.2.100916
The following problems are known issues as of release ST.1.2.100916.
General
PR_59404 — PPP interfaces are not removed after the a tunnel goes down or is removed from
configuration. The PPP interface can be seen in the Network Interfaces page. Its existence does not
cause any problems but is noticeable.
PR_58097 — The CLI command capture terminal gre will capture the GRE interface as well as others
interfaces.
PR_58514 — When IRAS is enabled, only the IPsec policy that is associated with IRAS is the effective
IPsec policy. Making changes to the IRAS configuration requires the IPsec policy be deleted and
recreated.
PR_59554 — A user with Operator Privileges can ping via Command Line Interface but not via the
Web browser interface
PR_60219 — Signature Download Error status shows up when IPS is neither licensed nor configured.
The error message "Error occurred during last update. Could not resolve domain" will appear on any
new system or system where the startup-config has been erased even if it does not have an IPS
signature service license and IPS is not configured. This error should not be reported under such
conditions.
PR_60430 — An erroneous log message with mid 306569 is being generated with no source address
and shows IPsec v6.
Example:
2010-08-02 13:54:35 info SPI = N/A, Seq. No = N/A :: Handling ICMP
ErrorMessage. ICMP Message Type 3 and Code 1 are not alloweddate:
2010-08-02time: 13:54:35msg: SPI = N/A, Seq. No = N/A :: Handling