TMS zl Module Release Notes ST.1.2.100916
Table Of Contents
- Release Notes: Version ST.1.2.100916 Software for the HP ProCurve Threat Management Services zl Module
- Contents
- Software Management
- Download Documentation from the Web
- Software Updates
- Special Considerations Prior to Updating
- Clarifications
- Enhancements
- Enhancements in ST.1.2.100916
- ST.1.1.100430
- ST.1.1.100226
- Command Line Interface (CLI) control of VPN functionality
- RADIUS authentication for management logins
- RADIUS authentication for L2TP users
- Renaming zones
- 256 VLANs now supported, increased from 19 VLANs
- Enhanced sort and filter capabilities for displaying log files
- Improved SNMP Monitoring for network traffic and key system resources
- Software Fixes in Releases ST.1.0.090213 - ST.1.2.100916
- Known Issues
45
Known Issues
Release ST.1.1.100430
From the Windows system, the VPN client just returns an error message saying that the
connection was interrupted.
■ PR_63072 — RADIUS error messages generated on successful authentication for Windows
7 L2TP/IPsec VPN user. In this particular scenario, the client was sending the machine-name
first, prior to sending the username. The username was configured for access but the
machine-name was not. As a result, log messages showing the machine-name failures were
recorded.
Release ST.1.1.100430
The following problems are known issues as of release ST.1.1.100430.
General
■ PR_7645 — When using tab key and then going out the CLI session, unexpected behavior
occurs.
Note: this occurs only when using the switch CLI and going to the TMS module using the 'services'
command.
Steps:
1. Open a TMS CLI session using the 'services' command from the switch.
2. Execute command #configure
3. Press the tab key
4. When the Ctrl+C message is displayed press Ctrl+Z
5. Go back into the TMS CLI session using the 'services' command.
6. Execute command #configure
The command is executed but the tab command seems to be executed as well.
■ PR_45860 — In the Web browser interface, if a manager is trying to login to a TMS using
FireFox and a manager is already logged into the Web browser interface from another
machine, the user is notified that another manager is logged in, but the pop up dialog asking
to close the window is not displayed. Internet Explorer displays the dialog correctly.
■ PR_52768 — When logging in as operator in the Web browser interface, the utilities page is
grayed out. As a result, an operator is not able to use the ping utility. However, when logging
in as an operator using an SSH session, the ping utility is available.
Firewall
■ PR_42671 — A log message is generated for a TCP sequence number but shows ICMP as
the protocol.