TMS zl Module Release Notes ST.1.2.100916
Table Of Contents
- Release Notes: Version ST.1.2.100916 Software for the HP ProCurve Threat Management Services zl Module
- Contents
- Software Management
- Download Documentation from the Web
- Software Updates
- Special Considerations Prior to Updating
- Clarifications
- Enhancements
- Enhancements in ST.1.2.100916
- ST.1.1.100430
- ST.1.1.100226
- Command Line Interface (CLI) control of VPN functionality
- RADIUS authentication for management logins
- RADIUS authentication for L2TP users
- Renaming zones
- 256 VLANs now supported, increased from 19 VLANs
- Enhanced sort and filter capabilities for displaying log files
- Improved SNMP Monitoring for network traffic and key system resources
- Software Fixes in Releases ST.1.0.090213 - ST.1.2.100916
- Known Issues
57
Known Issues
Release ST.1.1.100226/ST.1.1.100330
3. Add a Source NAT policy (e.g., NAT from Zone1 >External Services FTP, HTTP,SSH; Source
Any, dst 10.10.100.1-10-10.100.20 NAT value 10.10.100.111)
4. Open FTP server or any of the basic services
5. Verify IP address gets translated on the destination zone
6. Send ICMP traffic
7. Verify IP address gets translated on the destination zone when it should not be.
■ PR_51154 — Under high load with 100% CPU utilization, rebooting the TMS zl Module
causes the TMS zl Module to temporarily hang during the boot process. The TMS zl Module
will recover when the load decreases and frees up the CPU.
■ PR_51303 — If a RIP interface is disabled, deleted, then added back with the same IP
configuration, re-enabled again, it will not send out RIP updates any more. Workaround:
disable the RIP interface again and then re-enable it.
■ PR_51502 — In the CLI, the command capture file any ether ? does not list choices available.
■ PR_52023 — Performance Related IPS issue - Scheduled to be addressed in May-June 2010
release - Should not affect users with < 75% CPU utilization.
■ PR_52143 — In the TMS zl Module CLI, the command 'ping' would ignore the repetitions
option if the data-size parameter was specified before it. Workaround: Specify the repetitions
option before the data-size option.
■ PR_52174 — A Communications error dialog displays when attempting to change the
following settings in the TMS zl Module with PCM Device Manager:
sysName
sysContact
sysLocation
This will not happen for new TMS zl Modules running ST.1.1.YYYYY but will happen for any TMS
zl Module that updates from ST.1.0.XXXXXX to ST.1.1.YYYYYY. Unfortunately, the only known
workaround is to erase the startup-config for the TMS zl Module, reboot, and create a brand new
configuration.
■ PR_52365 — When adding a static route with a reachable gateway and then changing the
VLAN unique MAC address attribute, traffic is no longer routed. Workaround:
1. Delete all of the static routes associated with vlan XXXX using CLI "no ip route .... " (fastest)
or the Web browser interface (slower)
2. Add back the static routes again using CLI "ip route ..." (fastest) or the Web browser interface
(slower).