TMS zl Module Release Notes ST.1.2.100916
Table Of Contents
- Release Notes: Version ST.1.2.100916 Software for the HP ProCurve Threat Management Services zl Module
- Contents
- Software Management
- Download Documentation from the Web
- Software Updates
- Special Considerations Prior to Updating
- Clarifications
- Enhancements
- Enhancements in ST.1.2.100916
- ST.1.1.100430
- ST.1.1.100226
- Command Line Interface (CLI) control of VPN functionality
- RADIUS authentication for management logins
- RADIUS authentication for L2TP users
- Renaming zones
- 256 VLANs now supported, increased from 19 VLANs
- Enhanced sort and filter capabilities for displaying log files
- Improved SNMP Monitoring for network traffic and key system resources
- Software Fixes in Releases ST.1.0.090213 - ST.1.2.100916
- Known Issues
70
Known Issues
Release ST.1.0.090603
When the TMS zl Module is running ST.1.0.090213, the following behavior is observed:
The output of the switch CLI command, show services <slot-ID> detail, and the output of the TMS zl
Module CLI command, show version, are both correct.
After the TMS zl Module has been updated to ST.1.0.090603, the following behavior is observed:
The output of the switch CLI command, show services <slot-ID> detail reports the software version
initially installed rather than the updated version. The output of the TMS zl Module CLI command,
show version, is correct. Additionally, the software version information in the TMS zl Module's Web
browser interface correctly identifies the updated version, ST.1.0.090603, as the current version.
General
■ PR_38053 — Unnecessary log information is displayed when an invalid user tries to login
via SSH.
1. Open the TMS zl Module Web browser interface.
2. Go to the logging section.