TMS zl Module Release Notes ST.1.2.100916

Table Of Contents

Known Issues

Release ST.1.0.090603

Routes in R1 when VLAN300 has v2 enabled in TMS zl Module

Routes in R1 when VLAN300 has v1-v2 enabled in TMS zl Module

As a workaround, use RIP version 2 in the TMS zl Module.

■ PR_38775 — Using the Command Line Interface, there is no mechanism to disable PIM

globally. The Web browser interface must be used instead.

■ PR_38776 — Using the Command Line Interface, the rp-address command is not listed in

the PIM context. As a result, if you have a static RP, the RP can't be deleted in PIM context.

Example:

1. Open a CLI session.

2. Go into PIM context.

<config>#router pim

Destination Gateway Metric Distance VLAN Type

10.10.30.0/24 192.168.3.254 3 100 vlan300 rip

10.10.40.0/24 192.168.3.254 3 100 vlan300 rip

192.168.1.0/24 192.168.3.254 3 100 vlan300 rip

192.168.2.0/24 192.168.2.250 1 0 vlan200 connected

192.168.3.0/24 192.168.3.250 1 0 vlan300 connected