TMS zl Module Release Notes ST.1.2.101122

Known Issues

Release ST.1.0.090603

Routes in R1 when VLAN300 has v2 enabled in TMS zl Module

Routes in R1 when VLAN300 has v1-v2 enabled in TMS zl Module

As a workaround, use RIP version 2 in the TMS zl Module.

■ PR_38775 — Using the Command Line Interface, there is no mechanism to disable PIM

globally. The web browser interface must be used instead.

■ PR_38776 — Using the Command Line Interface, the rp-address command is not listed in

the PIM context. As a result, if you have a static RP, the RP can't be deleted in PIM context.

Example:

1. Open a CLI session.

2. Go into PIM context.

<config>#router pim

Destination Gateway Metric Distance VLAN Type

10.10.30.0/24 192.168.3.254 3 100 vlan300 rip

10.10.40.0/24 192.168.3.254 3 100 vlan300 rip

192.168.1.0/24 192.168.3.254 3 100 vlan300 rip

192.168.2.0/24 192.168.2.250 1 0 vlan200 connected

192.168.3.0/24 192.168.3.250 1 0 vlan300 connected