.vantronix Firewall ZL1 Installation and Getting Started Guide 2009-01
ξ 7
<IP-ADDRESS> is the IP address of the FTP server to which the product image
directory was copied, and <USERNAME> is the optional login ID for the FTP server
(enter this login ID only if itβs required for FTP server login).
3. Install the software image on the Services zl Module
After the Firewall ZL1 software image is downloaded into the Services zl Module image
repository (using either USB file copy or FTP transfer), type the following commands to
install the image:
ProCurve# services b 1 <CR>
ProCurve(services-module-B:HD)# uninstall product <CR>
ProCurve(services-module-B:HD)# install product
vantronix_Firewall_ZL1_J9xxxA_XXXXXX_XXXX <CR>
At this point the software image is installed and ready to be activated.ξξ
4. Activate the Firewall ZL1 product software image
After the software image is installed onto the Services zl Module, it must be registered
and activated before being run for the first time. To do this, first obtain a hardware ID for
the Services zl Module by entering the following commands:
ProCurve# services b 1 <CR>
ProCurve(services-module-B:HD)# licenses hardware-id activation <CR>
The hardware Id for package "activation" is
SG000GG000-A-0123456-ABCDEFG-0123456-ABCDEFG
Note: SG000GG000 is the serial number of the Services zl Module.
Detailed instructions to find your activation hardware ID are embedded in the My
ProCurve portal (https://my.procurve.com) registration pages and are also available in
the HP ProCurve Services zl Module Installation and Getting Started Guide.
Use this activation hardware ID to register the Services zl Module through the My
ProCurve portal. Sign in to the portal and then click on My Software and follow the
instructions to complete the registration process. You will be asked to enter the
activation hardware ID as well as the registration ID that was provided along with the
Firewall ZL1 product software image.
Once the registration process has completed successfully, you should receive a license
key in email and on the screen. This license key must be installed on the Services zl