WESM xl Getting Started Guide 2007-08

13
Getting Started
■ ProCurve Radio Port 220 (J9005A) with external antennas.
■ ProCurve 2600-PWR or other switch providing PoE (802.3af-compliant)
power.
A wireless services-enabled Switch 5300xl has the following recommended
minimum requirements:
• ProCurve Switch 5300xl must be connected to a network with DHCP
services enabled, or have a local DHCP service to provide IP
addresses.
• ProCurve Switch 5300xl must have at least one module for connecting
to the wired network.
• ProCurve Switch 5300xl must have at least one ProCurve Switch xl
10/100-TX PoE Module (J8161A), if the radio ports are connected
directly to the switch.
For the example equipment listed above, a sample setup is shown below.
Network
Radio Ports 230 or 210
5300xl switch chassis
D - 10/100-TX PoE port
Module
B - Wireless Edge Services
xl Module
External Power Supply
A - 10/100-TX port
Module
C - 10/100/1000 port
Module
Note: A, B, C, D refer to module slots of the 5300xl switch