Manualshelf

WESM xl Getting Started Guide 2007-08

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module
21222324252627282930
21
Getting Started
Step 5 - Set up Country Code and other wireless network
administrative data.
In this step, the Module is set up with the Country Code and other
administrative data.
1. From the Navigation Pane, select Network Setup
2. Using the Country list box, select the appropriate Country Code.
3. Enter data for the System Name, Location, and Contact if desired.
4. Select Apply to save the settings for this session.
5. Select Save to save the settings in a non-volatile memory in the Module,
to apply after a reboot.
The Country Code and administrative data will be displayed on the Device
Information screen: