WESM xl Getting Started Guide 2007-08

22
Getting Started
Step 6 - Verify Radio Port adoption.
To verify that the radio ports have been adopted by the Module, select Device
Information > Radio Adoption Statistics.
If some of the radio ports are not found on this screen, check the status of the
LEDs on the missing radio ports.
• If both the LEDs blink about once every 5 seconds, the Radio Port is
adopted and ready for use.
• If the amber light is continuously blinking, with the green light out.
the radio port is in the unadopted mode. In this case, please refer to
the appropriate Radio Port Installation and Getting Started Guide
for troubleshooting information. The guides are available at
www.procurve.com.