WESM xl Getting Started Guide 2007-08

Getting Started

In this example, all of the radios are assigned to the WLAN with the

Faculty1 SSID, and operate on BSS-ID 1.

6. The Module, wireless services-enabled Switch, and the radio ports are

now operational in Normal Mode.

Using your wireless-enabled laptop PC, confirm that the wireless network

with SSID (network name) “Faculty1” is available.

Configuration 2 - Normal Mode with five WLANs and two

radio ports.

This examples uses the following WLAN settings:

1. Select Network Setup > WLAN Setup > Configuration. Input the settings

as specified above, using the procedures in the prior configuration

example. The resulting screen is shown below:

WLAN SSID Name VLAN Authentication Encryption

1 Faculty1 Faculty 1 none 64WEP

2 Students2 Students 2 none none

3 Science3 Science Dept 3 802.1X EAP 64WEP

4 ADM4 Administration 4 802.1X EAP 128WEP

5 Math5 Math Dept 3 802.1X EAP 128WEP