WESM xl Getting Started Guide 2007-08

Loading New Module Software

Note When updating software, read the release notes provided with the

software update files for special instructions. For example, updating

software between WS.01.11 and WS.02.07 (or later) may require you to

clear your browser and Java cache before you can log in after a reboot.

To load new Module software, follow these steps:

1. Select Management > System Maint. - Software. This screen lists the

Primary and Secondary Module software resident on the Module system.

In the example below, the Primary software is WS.01.11, while the

Secondary software is WS.02.07. The screen indicates that the Primary

version of software was utilized for the current boot, and the Secondary

version will be used on the next boot.

2. Locate the path and filename of the new software version to be loaded. It

must be in a TFTP or FTP server . The IP address of the TFTP or FTP server

is also necessary.