WESM xl Management and Configuration Guide WS.02.XX and greater

2-111
Configuring the ProCurve Wireless Edge Services xl Module
SNMP Traps and Error Reporting
6. Click the Save link at the top of the Web browser interface to save the
changes to the startup-config.
SNMP Statistics
You can view a number of SNMP statistics. To understand these statistics, you
should know the five basic messages exchanged between SNMP servers and
agents:
■ GET—SNMP servers send a GET message to request information about
a setting.
■ GET-NEXT—SNMP servers send a GET-NEXT message to request infor-
mation about several SNMP objects in the device.
■ SET—SNMP servers send a SET message to modify a configuration
setting. Servers must have read-write access to make configuration
changes.
■ GET-RESPONSE—In response to a GET, GET-NEXT, or SET message,
SNMP agents send a GET-RESPONSE message. This message includes
one of the following:
• requested information
• confirmation that the requested change was made
• error that explains why the agent cannot supply the requested infor-
mation or make the requested change
■ TRAP—SNMP agents use TRAP messages to report events.
Many SNMP statistics reference these messages.
To view SNMP statistics, select Management > SNMP Access and click the
Statistics tab.