WESM xl Management and Configuration Guide WS.02.XX and greater

2-113
Configuring the ProCurve Wireless Edge Services xl Module
SNMP Traps and Error Reporting
Enabling SNMP Traps
By default, all SNMP traps are disabled. To enable SNMP traps, complete
these steps:
1. Select Management > SNMP Trap Configuration and click the
Configuration tab.
Figure 2-70. Management > SNMP Trap Configuration Screen
The SNMP traps for the Wireless Edge Services xl Module are divided into
the following categories:
• Redundancy
• Miscellaneous
•NSM
• Mobility
• DHCP
•Radius