WESM xl Management and Configuration Guide WS.02.XX and greater

2-178
Configuring the ProCurve Wireless Edge Services xl Module
Digital Certificates
• Email Address—a valid email address for you or the person responsi-
ble for managing the Wireless Edge Services xl Module (optional)
• FQDN—the module’s fully qualified domain name (optional)
• IP Address—the IP address for the certificate (optional)
• Password—a password that must be entered to install the certificate
(optional; only specify a password if requested by your CA)
Note Do not type special characters in any of the certificate credential fields; some
CAs may not create a certificate if the credentials contain special characters.
This includes most nonalphanumeric characters; however, periods ( . ) and
hyphens ( - ) are allowed.
Also, optional fields may not be optional for your particular CA. For example,
some CA’s require certain subject alternate names for server certificates.
Check your CA’s requirements before configuring the certificate request.
8. Check the Enroll the trustpoint box to generate the certificate request.
If you do not enroll the trustpoint at this time, you will be able to select
the trustpoint as an existing trustpoint when you run the Certificates
Wizard in the future. (See step 4.) However, the information that you
entered will be lost.
9. Click the Next button. The screen shown in Figure 2-107 is displayed.
The screen shows the certificate request, which is in Base 64–encoded
PKCS#10 format.