WESM xl Management and Configuration Guide WS.02.XX and greater

11-12
RADIUS Server
RADIUS Authentication
Configuring the Local RADIUS Database
You must complete the following tasks to configure the local database:
1. Create groups, which define policies for users.
2. Add user accounts to the group.
Creating a Group. A group defines policies on the Wireless Edge
Services xl Module’s internal RADIUS database, including:
■ the dynamic VLAN for authenticated users in this group
■ when users in this group are allowed to connect to the network
You can create two types of groups:
■ a normal group
■ a guest group, which only allows temporary guest accounts
To configure a group, complete these steps:
1. Select Network Setup > Radius Server and click the Groups tab.
Figure 11-4. Configuring RADIUS Server Groups