WESM xl Management and Configuration Guide WS.02.XX and greater

A-53
ProCurve Wireless Services xl Module Command Line Reference
Global Commands
upd-server
This command configures autoinstall update server parameters. The no command
negates this configuration.
Syntax
upd-server (cfg-file-loc | img-file-loc | ip | unreachable)
no upd-server
• cfg-file-loc - Sets configuration file location on the ftp/tftp server.
– WORD - Config file ftp/tftp location.
• img-file-loc - Sets image file location.
– WORD - Image file ftp/tftp location.
+img-file-ver- Image file version.
• ip - Server ip address.
– A.B.C.D - IP address in A.B.C.D format.
• unreachable - Sets update server reachability.
Default Setting
Disabled
Command Mode
Global Configuration
Example
Related Commands
show upd-server (page A-103)
ProCurve(wireless-services-B)#configure
ProCurve(wireless-services-B)(config)#upd-server img-file-
loc tftp img-file-ver 2
ProCurve(wireless-services-B)(config)#