WESM zl Management and Configuration Guide Supplement 2007-09

14
Using zl Switch Features for the Module
Wireless Edge
Services zl Module
Removed
• No action taken • No action taken • No action taken • No action taken
Radio Port Detected
(LLDP enabled on
switch and port)
• Create Auto-VLAN
from vlan-base
• Adds DRP
1
to Auto-
VLAN (temporary
VLAN override)
New State:
Auto-Provision
Auto-VLAN
• Adds DRP
1
to
Auto-VLAN
(temporary
override)
• No action taken • No action taken
Radio Port Removed • No action taken
(Only possible if no
Modules are
installed and LLDP
is disabled on the
switch or the port)
• Removes DRP
1
from Auto-VLAN
• No action taken • No action taken
User Creates or
Changes Auto-VLAN
• Create empty Auto-
VLAN with
specified VID
New State:
Auto-Provision
Auto-VLAN
• Create Auto-VLAN
with specified VID
• Add all <slot-id>DP
to new Auto-VLAN
• Moves all DRPs to
new Auto-VLAN
• If old Auto-VLAN
contains only
<slot-id>DP or is
empty, delete old
Auto-VLAN
•Create Auto-VLAN
with specified VID
• Add all <slot-id>DP
to new Auto-VLAN
• If old Auto-VLAN
contains only
<slot-id>DP or is
empty, delete old
Auto-VLAN
•DRP temporary
VLAN override
unchanged
•Create Auto-VLAN
with specified VID
• Add all <slot-id>DP
to Auto-VLAN
• Remove all
<slot-id>DP tagged
from VLAN 1
New State:
No Auto-Provision
Auto-VLAN
User Deletes Auto-
VLAN
• Operation denied -
VLAN does not
exist
• Operation denied -
must first disable
Auto-Provision
• Delete the VLAN
• If <slot-id>DP is
orphaned, move to
VLAN 1 (tagged)
New State:
No Auto-Provision
No Auto-VLAN
• Operation denied -
VLAN does not
exist
Event
Switch State
Auto-Provision
No Auto-VLAN
(initial default state)
Auto-Provision
Auto-VLAN
No Auto-Provision
Auto-VLAN
No Auto-Provision
No Auto-VLAN
1
DRP is a Downlink Radio Port (Part 2 of 3)