WESM zl Management and Configuration Guide Supplement 2007-09

23
CLI (Command Line Interface)
CLI (Command Line Interface)
You must first access the switch CLI, in accordance with your switch manuals.
You cannot access the Module CLI commands directly.
Displaying the Module’s Software Version
Use the show wireless-services <slot-id> command to display Module’s
software version. The following example shows a Module running software
version WT.01.03 in slot C of the switch:
Accessing the Module’s CLI
Access to the Module’s CLI is based on the user’s access level: operator or
manager. For example, manager-level CLI access uses the following CLI
command:
ProCurve# wireless-services <slot-id>
ProCurve(wireless-services-<slot-id>)#
where <slot-id> is the switch slot in which the Module is installed.
Table 3
shows the commands available at the switch operator and manager
levels.
ProCurve> show wireless-services c
Status and Counters - Wireless Services Module C Status
HP Wireless Services ZL Module J9051A
Versions : A.01.05, B.01.01, WT.01.03
Current status : running
Uplink MAC address : 0001e6-f586fd
For more information, use the show commands in wireless-services context
ProCurve>