WESM zl Management and Configuration Guide Supplement 2007-09

34
Module Messages in the Event Log
Module Messages in the Event Log
The Module sends messages to the zl switch Event Log. Each log message
contains the following elements:
<severity code> <date stamp> <time stamp> <number> wsm <slot-id>:
message
Messages reporting the module’s status, sent by the zl switch, are included
here. These log messages contain the following elements:
<severity code> <date stamp> <time stamp> <number> HPESP: message
Wireless Edge Services Module Event Log messages from the module and the
switch are described below.
Table 4. Event Log Messages
# Message Severity Description
648
Wireless Services zl Module <slot-id>: Self-
test failed (reason)
major The module self-test failed. The reason
appears in parentheses.
649
Wireless Services zl Module <slot-id>: base
configuration transfer failed
major A problem occurred when loading the
module configuration
650
Wireless Services zl Module <slot-id>:
incompatible BIOS version: (version)
major The module BIOS is not compatible
with the current switch software.
651
(Message is not applicable to this module.)
652
(Message is not applicable to this module.)
653
(Message is not applicable to this module.)
654
(Message is not applicable to this module.)
655
(Message is not applicable to this module.)
656
(Message is not applicable to this module.)
657
Wireless Services zl Module <slot-id>:
application initialization failed
major The application did not initialize due to
a software incompatibility with the
switch or the application could not
create VLANs.
658
Wireless Services zl Module <slot-id>: Illegal
event <id> at state <id>
major This message is used for debugging
purposes.