WESM zl Management and Configuration Guide Supplement 2007-09

35
Module Messages in the Event Log
659
Wireless Services zl Module <slot-id>:
excessive reboots detected
major Communication has not been
established with the switch. The
module is not ready.
660
Wireless Services zl Module <slot-id> removed
before shutdown completed
major The module was removed before the
shutdown process was completed.
661
Wireless Services zl Module <slot-id> is safe
for removal
info The module may be safely removed
from the chassis.
662
Wireless Services zl Module <slot-id>:
incompatible application version: (version)
major The module software is not compatible
with the switch software.
663
(Message is not applicable to this module.)
664
Wireless Services zl Module <slot-id> is
shutting down
info The shutdown process has been
initiated.
665
Wireless Services zl Module <slot-id> is
rebooting
info The module is being rebooted.
666
Wireless Services zl Module <slot-id> is
booting
info The module is loading its operating
system.
667
Wireless Services zl Module <slot-id> is ready
info The module has loaded its operating
system and is ready.
668
Wireless Services zl Module <slot-id> HPLAP
send TLV error condition <id> on connection
ID <id>
info A transmit error occurred between the
application and the switch when
sending a type, length, and value
element.
669
(Message is not applicable to this module.)
670
Wireless Services zl Module error processing
license.
major A license could not be read or updated.
671
Slot <slot-id> License updated successfully
info A license update was successful.
672
Wireless Services zl Module error while processing.
warning An unexpected event occurred when
accessing module's application data.
673
Wireless Services zl Module <slot-id> flash
write aborted; write already in progress
info A write to the module’s flash memory
failed because another write was
already in process.
1500
ESPd beginning main:xx.xx.xx.
info The module is starting operation. The
platform version, xx.xx.xx, is listed.
1501
Connection to switch status changed, status xx
major A protocol error has occurred. A status
code is provided for Support use.
1502
Received empty license record.
major A default license is not installed.
Contact ProCurve.
# Message Severity Description