WESM zl Management and Configuration Guide Supplement 2007-09

36
Module Messages in the Event Log
1503
Number of Radio Ports supported xx.
info Indicates the number of radio port
licenses present on a module when it
begins or resumes operation.
Redundant modules always report 0
licenses.
1504
This Version of Software xx.xx.xx cannot support x
number of Radio Ports.
major This message appears followed by
message 1505. The number of licenses
installed is not supported by the current
software version.
1505
Revert back to your old version or contact support.
major The current number of licenses are not
supported by the software version in
use.
1506
Received license buffer of zero length record.
info An error occurred when processing a
software license.
1507
License key Update complete.
info A license key update has completed.
1508
License Write in Progress.
info The module is writing a license.
1509
Switch terminated connection.
major The switch no longer provides access
to the module’s CLI.
1510
Privilege level CLI session out of range: x.
info The CLI session privilege level on the
switch is not valid for the module’s CLI.
1511
Unknown privilege level: (level), defaulting to lowest
level.
info An unknown privilege level was used to
access the module CLI. The privilege
level defaults to the lowest level.
1512
Unknown TLV received x.
debug Unknown TLV value received by the
switch from the module.
1513
SendTLV error status x.
major A problem has occurred processing a
TLV value sent from the module to the
switch. The error status codes (x) are
as follows:
0 - No errors
1 - No Connection
2 - Resource Allocation Error
3 - Flow Control Active
4 - Invalid Data
5 - Too Many Packets
6 - Max TLV Error
1515
Downlink traffic blocked due to invalid config on
VLAN 1.
major Both the internal Uplink and Downlink
ports are members of the same VLAN.
To prevent a broadcast storm, all traffic
in the Downlink port on that VLAN will
be blocked.
# Message Severity Description