WESM zl Management and Configuration Guide WT.01.03 and greater

A-183
ProCurve Wireless Services zl Module Command Line Reference
Show Commands (Wireless)
Example
show wireless wlan
This command displays the WLAN configuration.
Syntax
show wireless wlan (config | statistics)
+ config Wlan configuration
- <132> A wlan index <132>
- all All wlans in configuration
- enabled Only wlans that are currently enabled
+ statistics WLAN statistics
- <132> A wlan index <132>
++ detail Detailed wlan statistics
Default Setting
N/A
HPswitch(config-wireless)#show wireless wireless-module-statistics
stations Associated : 0 Radios adopted : 4
------ Traffic -------------------------------------------------------
Total Rx Tx
---------------- ---------------- ----------------
30s 1hr 30s 1hr 30s 1hr
Pkts per sec: 0.00 0.00 0.00 0.00 0.00 0.00 pps
Throughput: 0.00 0.00 0.00 0.00 0.00 0.00
Mbps
Avg bit speed: 0.00 0.00 Mbps
% Non-unicast pkts: 0.00 0.00
------ RF Status------------------------------------------------------
30s 1hr
Avg station signal: 0.00 0.00 dBm
Avg station noise: 0.00 0.00 dBm
Avg station SNR(dB): 0.00 0.00